Materials & Alloys
[list] [list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2016 Nanometric Surface Modification of Iron and Steel Powders
Presented at the World PM 2016 congress & exhibition in Hamburg, Germany in October 2016 and published in the congress conference proceedings available from the European Powder Metallurgy Association (EPMA).
R. R. Vintila, R.A.L. Drew, Mechanical & Industrial Engineering, Concordia University, L.Y. Aguirre-Perales, V. Paserin, Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2016 Binder-jetting additive manufacturing with water atomized iron powders
Presented at the AMPM 2016 conference on Additive Manufacturing, held with MPIF / APMI International Conference on Powder Metallurgy & Particulate Materials in Boston, USA, in June 2016.
V. Paserin, I. Bailon-Poujol, Rio Tinto Metal Powders, Canada & K. Inaekyan, V. Brailovski, ÉTS – École de technologie supérieure
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2016 Characterization of Iron Powder Mixes Prepared with a Compressible Iron Powder
Presented at the PM16 International conference on Powder Metallurgy for Automotive and Engineering Industries in Pune, India in 2016. Conference proceedings are available from the Powder Metallurgy Association of India.
M. Moravej, I. Bailon-Poujol, C. Labrecque, Rio Tinto Metal Powders & P. Khole, Rio Tinto India
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2014 Effect of C, Mn and Cr conc, dens, sint temp and cool rates on prop of Lean Alloy PM Steels
Presented at the 2014 World congress on Powder Metallurgy & Particulate Materials Powder held in
Orlando, USA in May 2014 and published in the Advances in Powder Metallurgy & Particulate Materials-
2014 conference proceedings available from the Metal Powder Industries Federation.
F. Chagnon, J. Campbell-Tremblay and C. Blais Rio Tinto Metal Powders, Laval University
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2014 Effect of Ni and Cu Addition on Pre-Alloyed Mo Powders Designed for High Performance Applications
Presented in September 2014 at the Euro PM Congress on powder metallurgy in Salzburg, Austria, organized by the European Powder Metallurgy Association Effect of Ni and Cu Addition on Pre-Alloyed Mo Powders Designed for High Performance Applications
Julie Campbell-Tremblay, Sylvain St-Laurent, Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2014 Development of high compressible leaner alloyed steel powders equivalent to Mo-Ni-Cu diffusion bonded powders
Presented at the 2014 World congress on Powder Metallurgy & Particulate Materials Powder held in Orlando, USA in May 2014 and published in the Advances in Powder Metallurgy & Particulate Materials-2014 conference proceedings available from the Metal Powder Industries Federation.
Sylvain St-Laurent and Julie Campbell-Tremblay, Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2013 Properties of various MIP Grades
Presented at the Euro PM2013 congress held in Gothenburg, Sweden in September 2013
and published in the congress conference proceedings available from the
European Powder Metallurgy Association (EPMA).
François Chagnon, Julie Campbell-Tremblay and Maryam Moravej,
Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2013 A new approach to Lean Alloy PM Steels
Presented at the 2013 International conference on Powder Metallurgy & Particulate Materials held
in Chicago, USA in June 2013 and published in the Advances in Powder Metallurgy & Particulate
Materials-2013 conference proceedings available from the Metal Powder Industries Federation
François Chagnon and Lydia Aguirre,
Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2013 Development of optimized diffusion alloyed powders
Presented at the 2013 International conference on Powder Metallurgy & Particulate Materials held in
Chicago, USA in June 2013 and published in the Advances in Powder Metallurgy & Particulate Materials-
2013 conference proceedings available from the Metal Powder Industries Federation
Julie Campbell-Tremblay and Sylvain St-Laurent,
Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2012 Machinability of Malleable Iron Powder Materials vs Ductile Iron and Powder Forged FC-0205 Materials
Presented at the PM2012 Powder Metallurgy World Congress in Yokohama, Japan in October
2012 and published in the congress proceedings available from the
Asian Powder Metallurgy Association (APMA).
M. Moravej, J. Campbell-Tremblay, C. Labrecque,
Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2012 Development and Properties of a New Malleable Iron Powder Grade
Presented at the 2012 MPIF / APMI International Conference on Powder Metallurgy & Particulate
Materials held in Nashville, USA in June 2012 and published in the Advances in Powder Metallurgy & –
2012 conference proceedings available from the Metal Powder Industries Federation.
F. Chagnon and C. Coscia,
Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2012 Design of Low Cost High Performance Diffusion-alloyed Powders
Presented at the PM2012 Powder Metallurgy World Congress in Yokohama, Japan in October
2012 and published in the congress proceedings available from the
Asian Powder Metallurgy Association (APMA).
J. Campbell-Tremblay, S. St-Laurent,
Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2012 Characterization and mech properties and machining performance of new malleable iron powder
Presented at the 2012 MPIF / APMI International Conference on Powder Metallurgy & Particulate
Materials held in Nashville, USA in June 2012 and published in the Advances in Powder Metallurgy
&Particular Materials – 2012 conference proceedings available from the Metal Powder Industries
Federation.
M. Moravej, F. Chagnon and J. Campbell-Tremblay,
Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2011 Effect of powder mix formulation and sintering conditions on dimensional stability of sinter hardened powders
Presented at the PM11 International conference on Powder Metallurgy for Automotive and Engineering Industries in Pune, India in February 2011 and conference proceedings are available from the Powder Metallurgy Association of India
Sylvain St-Laurent, Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2010 New iron powder for low density applications
PM2010 World Congress – Water Atomized Powders
François Chagnon, Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2005 Effect of Nickel Type on Properties of Binder-Treated Mixes
L. Azzi, S. Pelletier, T. Stephenson of Industrials, and S. St-Laurent of QMP, PM2TEC 2005 conference, Montreal, June 2005
2005 High Performing Premixes for Demanding PM Applications
C. Gelinas and S. St-Laurent of QMP, Euro PM Congress & Exhibition, Prague, Oct 2005.
2003 Effect of Molybdenum Content on Mechanical Properties of Sintered PM Steels,
C. Ruas and S. St-Laurent of Quebec Metal Powders Ltd., PTECH Brazil Conference, Guaruja, Brazil, Nov. 19-21, 2003.
2003 Selecting Low Alloy Mo Steel Powders for High Performance Applications,
Sylvain St-Laurent, Joel Poirier and Francois Chagnon, QMP PM2Tec Conference Las Vegas, June 2003.
2003 Fatigue Properties of Diffusion-Bonded Molybdenum Steel Powders for High Strength Applications,
G. Olschewski and Gregor Nitsch of QMP Metal Powders GmbH, Germany, Euro PM2003, Valencia, Spain, October 2003.
2002 Dynamic Properties of Sintered Molybdenum Steels,
S. St-Laurent and F. Chagnon of Quebec Metal Powders Ltd., PM World Congress, Orlando, June 2002.
2002 Effects of Copper Addition on Properties of 1.5% Mo Sintered Steels,
F. Chagnon and Yves Trudel of Quebec Metal Powders Ltd., PM World Congress, Orlando, June 2002.
2002 Effect of Density and Mix Formulation on Sintered Strength and Dimensional Stability of 0.85% Mo Low Alloy Steel Powders,
C. Gelinas and S. St-Laurent of Quebec Metal Powders Ltd., PM World Congress, Orlando, June 2002.
2002 Diffusion-Bonded Molybdenum Steel Powders for High Strength Applications,
G. Olschewski and Gregor Nitsch of QMP Metal Powders GmbH, Germany, PM World Congress, June 2002.
2002 Effect of Mix Formulation on the Dimensional Stability of Sintered Automotive Components
C. Gelinas and S. St-Laurent of QMP, SAE paper 2002-01-0668, Detroit, February 2002
2001 Influence of Powder Mix Formulation on Green and Sintered Properties of Warm Pressed Specimens,
S. St-Laurent and F. Chagnon of Quebec Metal Powders Ltd., PM2TEC Conference, New Orleans May 2001.
2001 A New Approach to Die Wall Lubrication for P/M Applications,
P. Lemieux, S. Pelletier, P.E. Mongeon, Y. Thomas, L.P. Lefebvre of Industrial Materials Institute/National Research Council Canada and F. Chagnon of Quebec Metal Powders Ltd., PM2TEC Conference, New Orleans May 2001.
2000 Optimised Properties of Molybdenum PM Steels by Advanced Case Hardening Process,
G. Olschewski and Dr. R. Link of QMP Metal Powders GmbH, EURO PM, Oct. 18-20, 2000 Munich, Germany
2000 Effect of Sintering Temperature and Carbon Content on Static and Dynamic Properties of Diffusion-Bonded Steels,
L. Tremblay and F. Chagnon of QMP, PM2TEC New York Conference, May 2000.
2000 Effect of Graphite and Copper Concentrations and Post Sintering Cooling Rate on Properties of Sinter Hardened Materials,
F. Chagnon of QMP and Martin Gagne Rio Tinto Iron & Titanium Inc. – Technology, PM2TEC New York Conference, May 2000.
2000 Low Alloy Steel Powders for Sinter Hardening Applications,
F. Chagnon and G. Olschewski of QMP, JPMA PM2000, World Congress and Exihibition, Nov 12-16, 2000 Kyoto, Japan
2000 Optimizing Powder Mix Formulations and Processing Conditions for Warm Compaction,
F. Chagnon and S. St-Laurent of QMP, JPMA PM2000, World Congress and Exihibition, Nov 12-16, 2000 Kyoto, Japan
2000 Applications of the Binder Treated Mo-Prealloyed Premixes as Alternatives to Diffusion Bonded Powders
R. Fuo of QMP Metal Powders, Asia Pacific, Hong Kong, JPMA PM2000 World Congress and Exhibition, Nov 12-16, 2000, Kyoto, Japan.
1999 Dynamic Properties of Pre-Alloyed Mo-Steel Powders for High-Loaded P/M Applications,
G. Olschewski of QMP Metal Powders GmbH and D. Barrow of QMP Metal Powders Ltd, Ipswich, DF PM99, September 19-22, 1999, Piestany, Slovak Republic
1999 Dynamic Properties of Pre-Alloyed Molybdenum Steel Powders for Gear Applications,
G. Olschewski of QMP Metal Powders GmbH, Euromat 99, September 27-30, 1999, Munich, Germany
1998 Modern Prealloyed PM Steels and Advanced Process Technology,
Rainer Link of QMP-GmbH, 1998 World P/M Conference, Granada, Spain, October 1998.
1998 Microstructural Characterization of Diffusion-Bonded P/M Materials,
L. Tremblay, F. Chagnon,presented at the PM2TEC Las Vegas Conference, May 1998.
1997 Designing Robust Powder Mixes for Warm Compaction,
S.St-Laurent, F.Chagnon, presented at the PM2TEC Chicago Conference, June 1997.
1997 The Development and Characteristics of Low Alloy Steel Powders for Sinter Hardening Applications,
C.Ruas, F.Chagnon, International Conference & Exhibition on Powder Metallurgy for Automotive Components, New Delhi, February 1997.
1996 Designing Low Alloy Steel Powders for Sinter Hardening Applications,
F.Chagnon, Y.Trudel, Advances in Powder Metallurgy & Particulate Materials,1996 World Congress, Washington, D.C., June 1996.